Practical research · 9 September 2026
Outsource UV Transfers or Buy a Printer? A Cost Worksheet
Buying a printer becomes easier to evaluate when you compare the same finished order through two workflows. Start with actual supplier quotes and your own time records. The example below is invented to demonstrate the calculation; it is not a claim about typical prices, profit or demand.
Open the calculator / printable worksheet · Updated 21 September 2026
Free worksheet · updated 21 September 2026
UV production cost and payback calculator
Compare outsourcing with owning a printer using the same number of acceptable, sellable pieces. Include labour, rejected work and monthly upkeep before judging payback.
Illustrative starting values. Replace them with your own measurements or quotes; these are not measured product results.
- Variable cost per acceptable piece
- $1.79
- Monthly saving at entered volume
- $264.21
- Simple payback
- 30.28 months
- Break-even monthly volume
- 213 acceptable pieces
- Saving at 200 pieces/month
- $-17.89
- Saving at 400 pieces/month
- $264.21
- Saving at 600 pieces/month
- $546.32
Your observation record
Fill in your own observations. Entries stay on this page and reset when you leave; download or print to keep them.
Method and limits
- Cost per acceptable piece = (materials + labour minutes ÷ 60 × hourly cost) ÷ (1 − rejected fraction). Rejected attempts consume the same cost in this simplified model.
- Monthly saving = acceptable volume × (outsourced unit cost − in-house variable unit cost) − monthly fixed costs. Payback = installed cost ÷ positive monthly saving. A loss has no payback.
- The volume scenarios hold prices, labour rate, waste fraction and fixed costs constant. They do not predict demand or machine capacity. Roundings apply only to displayed results.
- Include maintenance, software and cleaning in fixed costs and blanks, ink and film in materials as appropriate. Avoid counting the same cost twice. Add freight, finance, taxes and downtime to your own quotes; they are not automatically included.
Published by Karl Murphy for UV Print Advisor. No hands-on test results are claimed by this worksheet. About this publication.
https://uvprintadvisor.com/learn/outsource-uv-transfers-or-buy-printer · Worksheet edition 21 September 2026
Compare equivalent finished work
Choose one repeat order: the same artwork size, quantity, material and quality requirement. For outsourcing, include transfer price, shipping, setup charges and the time spent checking deliveries. For in-house production, include ink, film, cleaning supplies, rejected output, production labor and packing time. Costs common to both options, such as the same blank and customer postage, can be excluded from the difference but still belong in your overall product margin.
Verify that both routes produce the same kind of decoration. A direct UV flatbed and a UV-DTF transfer workflow are not interchangeable merely because both use UV-curable ink. Roland's primer guidance illustrates why material compatibility requires a separate production check. A cheaper process that fails on your blank is not a saving.
Source: Roland DG: test substrate and primer compatibility before production
Calculate contribution savings before payback
Suppose an outsourced usable transfer costs $3.20 delivered. Suppose your measured in-house variable cost is $1.70 per usable transfer, including paid labor and rejects. The difference is $1.50. With an illustrative $300 monthly allowance for maintenance, software and other ownership overhead, you need 200 usable transfers a month just to cover that allowance: $300 divided by $1.50.
At 400 transfers a month, the saving after that overhead is $300: 400 multiplied by $1.50, minus $300. If the installed machine and training cost were $8,000, simple payback would be about 26.7 months at that steady volume. This calculation excludes financing, tax, resale value and demand changes; it is a comparison tool, not a full business forecast.
| Illustrative monthly volume | Saving after $300 overhead |
|---|---|
| 100 usable transfers | −$150 |
| 200 usable transfers | $0 |
| 400 usable transfers | $300 |
| 800 usable transfers | $900 |
Stress-test the assumptions
Repeat the calculation with half your expected orders and with higher reject costs. Count the owner’s time even if you currently take no wage. Time used to clean a machine, troubleshoot a nozzle check or remake failed work cannot simultaneously be spent selling or fulfilling other products.
Ask how a quiet month affects the maintenance routine and who services the machine locally. Obtain the written support and warranty terms before assuming downtime is free. Track usable output rather than prints attempted: spending $170 to produce 80 accepted transfers costs $2.125 per usable transfer, not $1.70. That denominator can change the buying decision.
Use a purchase gate
Keep a record of repeat orders, landed outsourcing costs and real fulfillment time. Buy only when the comparison remains workable under a conservative volume assumption and you can accommodate the complete workflow. A short outsourced run can help validate the product and its handling requirements before committing to equipment.
If speed is the main reason to bring work in-house, record supplier turnaround and the value of missed deadlines separately. Faster fulfillment may justify ownership even when simple per-transfer savings are modest, but label that benefit clearly. Do not quietly turn hoped-for sales or unpriced convenience into guaranteed cash savings.